Tsys Application
This article will guide you through setting up your Card Reader using Tsys.
Basic Unboxing
- Unbox card reader and ensure all cables are in packaging
- Includes card reader and power cable
- Connect card reader to power
Network Set Up
Connecting Ethernet (Preferred)
- Connect Ethernet to the red tip on the dongle
- Enter Password (if password is not 9876 set it to 9876)
- 9876
- Other Passcode options
- Pax9876@@
- pax9876@@
- 9876@@
- Pax9876
- pax9876
- Select network settings
- Enable Ethernet
- Set Up Static IP
- Select Ethernet settings
- Select the “Static” option
- Network Parameters will prefill
- Save selection
- Navigate to Home screen
Connecting WiFi
- Enter Password (if password is not 9876 set it to 9876)
- 9876
- Other Passcode options
- Pax9876@@
- pax9876@@
- 9876@@
- Pax9876
- pax9876
- Select network settings
- Select preferred network
- Ensure card reader is connected to the same network as the POS
Application Set Up
- Finding IP address
- Navigate to settings
- Type Passcode
- Passcode options are listed above
- Select network settings
- Select network name
- Navigate to the IP section
- Setting up connection on POS
- Go to POS
- Log in with Admin Code
- Click menu icon in the top left
- Select Hardware
- Select Card Reader
- Type IP address in the corresponding field
- Click save
- Open the Tsys application on the Card Reader
Did this answer your question?
How can we improve this article?
